#Google radio automation raspberry pi driver

The card supplies 5V and up to 3A to the Raspberry Pi on the GPIO bus. The Building Automation card requires a 24VAC/1A external transformer to operate and has to be powered from it's own pluggable connector. The card is compatible with all Raspberry Pi versions from Zero to 4 and has all the necessary I/Os for your Building Automation projects. This feature leaves the remaining 24 GPIOs available for the user. The Building Automation Cards share the I2C bus using only two of the Raspberry PiвЂ™s GPIO pins to manage all eight cards. In and out connectors simplify daisy-chain wiring to other devices.

#Google radio automation raspberry pi driver

The RS485 can be driver either from the local processor implementing Modbus RTU device, or directly from the Raspberry Pi using the dedicated pins on the GPIO connector, which are routed on the Industrial board to the RS485 driver. High DC loads of up to 10A and 250V, with fast response time and unlimited endurance can he driven by adding one or more 8-MOSFET cards.Д¬onnect the card to other Industrial Automation systems using RS485/Modbus communication ports. Heavy loads of up to 8A and 250VAC can be driven adding one or more 4-RELAYS cards. TVS diodes on all inputs protect the card for external ESD, and the on-board resettable fuse protects is from accidental shorts. Activate the hardware watchdog to monitor and power cycle the Raspberry Pi in case of software lockup. Keep time indefinitely even during power failure using the Real Time Clock with battery backup. Status LEDs display the state of all outputs. Four 0-10V outputs can control light dimmers. Four TRIAC outputs can drive loads up to 0.5A at 24VAC. Eight universal inputs can be jumper selected to process 0-10V signals, read 1K or 10K temperature sensors or dry contact counters. All mounting hardware included: stand-offs, screws and nuts ДESCRIPTION BUILDING AUTOMATION for Raspberry PiД«rings to Raspberry Pi all IO's needed for Building Automation Systems.Status LEDs on all Digital Inputs and Outputs.